Bài viết Blog gần đây

  • If 2K is formed, their cover athlete announcement will take place around the beginning of July. In 2019, NBA 2K20 cover athletes were officially announced on July 1, although Dwyane Wade Legend Edition leaked earlier. Compared with the same time of year, we still have more than one month. Unless del...
Xem tất cả

Preparation For Shutdown Of Flat Screen Printer Factory

  • We are going to have the Dragon Boat Festival holiday soon, so during the holiday, many Flat Screen Printer Factory are going to shut down. Today, let's talk about the maintenance methods of screen printing machines:

    1. The whole machine of the open rotary screen printing machine adopts full touch screen control, so the touch screen is easy to be damaged, so it is strictly prohibited to be hit or scratched by hard objects and sharp tools. Users should wipe and oil the open rotary screen printing machine at least once a week as required.
    2. Regularly check the accumulated water in the filter cup of the open rotary screen printing machine, drain the water once per shift, avoid bringing the water into the cylinder, and regularly add lubricating oil to each lubricating point to ensure the normal operation of the equipment of the open rotary screen printing machine;
    3. Before starting the machine every time, you must know clearly the operating range of the machine, connect the air source and power source, and check the operation of the machine. Only when the machine is operating normally can it be put into production and use.
    4. Please keep the Open Type Rotary Screen Printing Machineas clean as possible. If dirt appears, please wipe it clean with soft and clean dry cloth.  If dirt is difficult to remove, add a little more neutral detergent to wipe it. It is strictly prohibited to wipe it with alcohol or diluent.
    5. The main part of the equipment shall be disassembled for inspection and adjustment, including cleaning of the motor, inspection of technical status, replacement of lubricating oil, etc.;  Replace some parts that reach the specified wear limit, such as bearing key pins, electrical and pneumatic components, etc.